Search Products
loading...
Connect with Us

Accepted forms of payment

TFT Automatic Nozzles Mid-Matic Series

Mid-Matic Series

Overview

  • The Mid-Matic handline nozzle incorporates TFT’s unique stainless steel slide valve for turbulence free flow control and includes the exclusive integrated debris screen to prevent stream quality degradation. All models accept low and multi-expansion foam attachments for increased finished foam performance

  • The Mid-Matic handline nozzle is available with 100, 75 or 55psi operational pressure choices to meet any fire ground operational challenge. All models are available with your choice of high strength bonded rubber fog teeth which provide a full filled pattern, or the wide protective pattern of TFT’s unique stainless steel spinning teeth design.

  • The Mid-Matic handline nozzle comes standard with reflective labeling as well as your choice of color coded pistol grip and shut off handle. This constant pressure variable gallonage nozzle series is available in tip only and shut off configurations, is individually serialized, and comes with TFT’s exclusive 5 year warranty.

HM-TO

MID-MATIC TIP 100 PSI 1.5" NH (38mm) Automatic nozzle for use with separate valve or valved playpipe. Full automatic 100 psi (7 bar) pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, and lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Tip does not shut off and must be used with a separate valve or valved playpipe. 1.5" NH (38mm) rigid rocker lug-coupling is standard. FM Approved

HM-STO

MID-MATIC TIP/TWIST-OFF 100 PSI 1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes patented twist slide-type valve for turbulence-free flow control, flush without shutting down and is lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. 1.5" NH (38mm) rigid rocker lug coupling is standard. May be used with a separate valve or playpipe. Ideal for break-and-extend operations. 1.5" NH (38mm) rigid rocker lug coupling is standard. FM Approved

HM-V

MID-MATIC NOZZLE 100 PSI 1.5" NH (38mm) Automatic with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Rocker lug 1.5" NH (38mm) full-time swivel coupling is standard. FM Approved

HM-VPGI

MID-MATIC W/GRIP1.5" NH (38mm) Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, patented slide-type valve for turbulence-free flow control, six detent flow positions, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Pistol grip is mounted below the valve. 1.5" NH (38mm) full-time swivel rocker lug coupling is standard. FM Approved

HM-TPGI

MID-MATIC WITH IMPULSE TRIGGER VALVE SYSTEM Automatic pressure control with a flow capacity of 70-200 gpm (260-760 l/min). Includes flush without shutting down, trigger operated slide valve for turbulence-free flow control, and "Gasket Grabber" inlet screen. Lightweight hardcoat anodized aluminum for maximum resistance to corrosion and wear. Pistol grip is mounted below the valve. 1.5" NH (38mm) full-time swivel rocker lug coupling is standard.

IMPULSE TRIGGER VALVE SYSTEM

The innovative integration of a trigger actuator with TFT's globally recognized slide style of valve, provides complete nozzle operator flow control with only a single hand, allowing the other hand to consistently control stream pattern selection. The trigger controller operates smoothly and easily throughout the nozzle's rated flow and pressure range, and offers the ability to hold multiple valve positions at the operator's discretion. The unique ergonomic pistol grip compliments the trigger valve design and greatly reduces operator fatigue.

  • Trigger valve controller w/ optional flow lock
  • Integrated slide style shut off valve
  • Front protective bumper with molded rubber fog tooth

enter image description here

For more information please visit www.tft.com

Option Unit Purchase
TFT 1.5" Mid-Matic 100 PSI
TFT 1.5" Mid-Matic 100 PSI
HM-TPGI
Call to order
TFT Mid-matic Tip 1.5" NH
TFT Mid-matic Tip 1.5" NH
HM-TO
Call to order
TFT MId-Matic w/Grip 1.5" NH
TFT MId-Matic w/Grip 1.5" NH
HM-VPGI
Call to order
TFT MID MATIC NOZZLE 1.5" NH
TFT MID MATIC NOZZLE 1.5" NH
HM-V
Call to order
TFT Mid-Matic Tip, Twist-Off
TFT Mid-Matic Tip, Twist-Off
HM-STO
Call to order